-
【受注生産】夏03(GOAL ZERO Lighthouse Micro用)
¥5,500
◆こちらの商品は受注生産品となります。(システムの都合上、「在庫あり」と表示されます) ご注文いただいてからの製作となりますので発送までに1〜2週間程度お時間をいただきます。 夏03 GOAL ZERO Lighthouse Micro用のランタンシェードです。 (LEDランタン本体は付属しません) 夏の向日葵をイメージして3色のアクリルを贅沢に使用しました。 キャンプ場での夏の思い出として印象深く残る逸品です。 取り付けは、ランタン底から内径の大きい順に差し込み、 最後に付属の固定用Oリングで固定してください。 細心の注意を払いながらレーザー加工していますが、 シェードパーツ表面に多少の加工痕が残る場合がございます。予めご了承ください。 【使用上の注意】 ・エッジが鋭角になっています。取り扱いの際にはご注意ください。 ・シェードパーツに大きな応力が加わった場合、パーツが破損する場合がございます。 破損時は、破損部が鋭角を持ち大変危険ですので、使用はお控えください。 ・固定用Oリングを取り付ける際は、LEDランタン本体を持って行ってください。 シェードパーツを持つと、パーツが破損する可能性が高まり大変危険です。 【内容物(材質)】 ・シェードパーツ(アクリル):6枚 ・固定用Oリング(NBR):1個 ◆This product is made-to-order. (Due to system reasons, it is displayed as "In stock".) Please allow 1 to 2 weeks for delivery as this product is made to order. Summer 03 Lantern shade for GOAL ZERO Lighthouse Micro. (LED lantern itself is not included) Luxurious acrylics in three colors were used to create the image of sunflowers in summer. It is an excellent product that will leave a lasting impression as a memory of summer at the campsite. To install, insert the lanterns in order of inner diameter from the bottom of the lantern. Finally, fix it in place with the included O-ring. Although we have laser-processed the shade parts with the utmost care, there may be some marks on the surface of the shade parts. However, there may be some processing marks left on the surface of the shade parts. Please understand this in advance. Cautions for use The edges are sharply angled. Please be careful when handling. If a large amount of stress is applied to the shade parts, the parts may break. When broken, the broken part has a sharp angle and is very dangerous, so please refrain from using it. When attaching the O-ring for fixing, please hold the main body of the LED lantern. Holding the shade parts is very dangerous as it increases the possibility of damage to the parts. Contents (Material) Shade parts (acrylic): 6 pieces O-ring for fixing (NBR): 1 piece
-
【受注生産】秋03(GOAL ZERO Lighthouse Micro用)
¥5,500
◆こちらの商品は受注生産品となります。(システムの都合上、「在庫あり」と表示されます) ご注文いただいてからの製作となりますので発送までに1〜2週間程度お時間をいただきます。 秋03 GOAL ZERO Lighthouse Micro用のランタンシェードです。 (LEDランタン本体は付属しません) 本製品の紅葉型パーツの色は、赤と黄です。 窓から見る秋の絶景を3色のアクリルを贅沢に使用して表現しました。 思わず見惚れてしまうような美しさを独り占めしてください。 取り付けは、ランタン底から内径の大きい順に差し込み、 最後に付属の固定用Oリングで固定してください。 細心の注意を払いながらレーザー加工していますが、 シェードパーツ表面に多少の加工痕が残る場合がございます。予めご了承ください。 【使用上の注意】 ・エッジが鋭角になっています。取り扱いの際にはご注意ください。 ・シェードパーツに大きな応力が加わった場合、パーツが破損する場合がございます。 破損時は、破損部が鋭角を持ち大変危険ですので、使用はお控えください。 ・固定用Oリングを取り付ける際は、LEDランタン本体を持って行ってください。 シェードパーツを持つと、パーツが破損する可能性が高まり大変危険です。 【内容物(材質)】 ・シェードパーツ(アクリル):6枚 ・固定用Oリング(NBR):1個 ◆This product is made-to-order. (Due to system reasons, it is displayed as "In stock".) Please allow 1 to 2 weeks for delivery as this product is made to order. Fall 03 Lantern shade for GOAL ZERO Lighthouse Micro. (LED lantern itself is not included) The colors of the autumn leaf-shaped parts of this product are red and yellow. The spectacular view of autumn seen from the window is expressed with the luxurious use of three colors of acrylic. Please keep the beauty all to yourself that you cannot help but admire. To install, insert the parts in order of inner diameter from the bottom of the lantern. Finally, fix it in place with the attached O-ring. Although we have laser-processed the shade parts with the utmost care, there may be some marks on the surface of the shade parts. However, there may be some processing marks left on the surface of the shade parts. Please understand this in advance. Cautions for use The edges are sharply angled. Please be careful when handling. If a large amount of stress is applied to the shade parts, the parts may break. When broken, the broken part has a sharp angle and is very dangerous, so please refrain from using it. When attaching the O-ring for fixing, please hold the main body of the LED lantern. Holding the shade parts is very dangerous as it increases the possibility of damage to the parts. Contents (Material) Shade parts (acrylic): 6 pieces O-ring for fixing (NBR): 1 piece
-
【受注生産】秋04(GOAL ZERO Lighthouse Micro用)
¥5,500
◆こちらの商品は受注生産品となります。(システムの都合上、「在庫あり」と表示されます) ご注文いただいてからの製作となりますので発送までに1〜2週間程度お時間をいただきます。 秋04 GOAL ZERO Lighthouse Micro用のランタンシェードです。 (LEDランタン本体は付属しません) 本製品の紅葉型パーツの色は、赤とオレンジです。 窓から見る秋の絶景を3色のアクリルを贅沢に使用して表現しました。 思わず見惚れてしまうような美しさを独り占めしてください。 取り付けは、ランタン底から内径の大きい順に差し込み、 最後に付属の固定用Oリングで固定してください。 細心の注意を払いながらレーザー加工していますが、 シェードパーツ表面に多少の加工痕が残る場合がございます。予めご了承ください。 【使用上の注意】 ・エッジが鋭角になっています。取り扱いの際にはご注意ください。 ・シェードパーツに大きな応力が加わった場合、パーツが破損する場合がございます。 破損時は、破損部が鋭角を持ち大変危険ですので、使用はお控えください。 ・固定用Oリングを取り付ける際は、LEDランタン本体を持って行ってください。 シェードパーツを持つと、パーツが破損する可能性が高まり大変危険です。 【内容物(材質)】 ・シェードパーツ(アクリル):6枚 ・固定用Oリング(NBR):1個 ◆This product is made-to-order. (Due to system reasons, it is displayed as "In stock".) Please allow 1 to 2 weeks for delivery as this product is made to order. Fall 04 Lantern shade for GOAL ZERO Lighthouse Micro. (LED lantern itself is not included) The colors of the autumn leaf-shaped parts of this product are red and orange. The spectacular view of autumn seen from the window is expressed by lavishly using three colors of acrylic. Please keep the beauty all to yourself that you cannot help but admire. To install, insert the parts in order of inner diameter from the bottom of the lantern. Finally, fix it in place with the attached O-ring. Although we have laser-processed the shade parts with the utmost care, there may be some marks on the surface of the shade parts. However, there may be some processing marks left on the surface of the shade parts. Please understand this in advance. Cautions for use The edges are sharply angled. Please be careful when handling. If a large amount of stress is applied to the shade parts, the parts may break. When broken, the broken part has a sharp angle and is very dangerous, so please refrain from using it. When attaching the O-ring for fixing, please hold the main body of the LED lantern. Holding the shade parts is very dangerous as it increases the possibility of damage to the parts. Contents (Material) Shade parts (acrylic): 6 pieces O-ring for fixing (NBR): 1 piece
-
【受注生産】冬01ゴールゼロカスタム(GOAL ZERO Lighthouse Micro用)
¥5,500
◆こちらの商品は受注生産品となります。(システムの都合上、「在庫あり」と表示されます) ご注文いただいてからの製作となりますので発送までに1〜2週間程度お時間をいただきます。 冬01ゴールゼロカスタム GOAL ZERO Lighthouse Micro用のランタンシェードです。 (LEDランタン本体は付属しません) 冬01(LEDLENSER ML4用)をゴールゼロ用にカスタム加工します。 ゴールゼロ用ではML4用のように組む順番を変えられません。 よって、以下のパターンから組む順番をお選びください(写真はパターン1です) ・パターン1 電源ボタンに近い方から、 リング:半乳 結晶大ロゴ入り:特殊加工透明 結晶大:特殊加工透明 結晶小:濃い青 結晶小:半乳 結晶小:薄い青 ・パターン2 電源ボタンに近い方から、 リング:半乳 結晶小:濃い青 結晶小:半乳 結晶小:薄い青 結晶大ロゴ入り:特殊加工透明 結晶大:特殊加工透明 ・レッドレンザー用の冬01パーツから穴径のみゴールゼロ用に変更して作成します。 ・外観写真は、ゴールゼロにレッドレンザー用の冬01パーツを当てがったイメージです。 ・発光写真は、レッドレンザー発光によるイメージです。 細心の注意を払いながらレーザー加工していますが、 シェードパーツ表面に多少の加工痕が残る場合がございます。予めご了承ください。 【使用上の注意】 ・エッジが鋭角になっています。取り扱いの際にはご注意ください。 ・シェードパーツに大きな応力が加わった場合、パーツが破損する場合がございます。 破損時は、破損部が鋭角を持ち大変危険ですので、使用はお控えください。 ・固定用Oリングを取り付ける際は、LEDランタン本体を持って行ってください。 シェードパーツを持つと、パーツが破損する可能性が高まり大変危険です。 【内容物(材質)】 ・シェードパーツ(アクリル):6枚 ・固定用Oリング(NBR):1個 ◆This product is made-to-order. (Due to system reasons, it is displayed as "In stock".) Please allow 1 to 2 weeks for shipping as it will be made to order. Winter 01 GOAL ZERO Custom Lantern shade for GOAL ZERO Lighthouse Micro. (LED lantern itself is not included) Winter 01 (for LEDLENSER ML4) will be custom processed for GOAL ZERO. For GOAL ZERO, the order of assembly cannot be changed like for ML4. Therefore, please choose the order of assembly from the following patterns (The photo shows Pattern 1) Pattern 1 From the one nearest to the power button Ring: semi-milk Large crystal with logo: Special processing transparency Large crystal: transparent with special processing Small crystal: dark blue Small crystal: semi-milk Small crystal: light blue Pattern 2 From the one nearest to the power button Ring: half milk Small crystals: dark blue Small crystal: half milk Small crystal: light blue Large crystal with logo: transparent Large crystal: specially processed transparent Only the hole diameter is changed for Goal Zero from the Winter 01 part for Red Lenser. The photo shows the image of applying the Winter 01 part for Red Lenzer to Goal Zero. The photo shows the image of Red Lensor's light emission. Although the laser processing was done with the utmost care, there may be some marks on the surface of the shade parts. Please note that some processing marks may remain on the surface of the shade parts. Please note that there may be some marks on the surface of the shade parts. Cautions for use The edges of this product have sharp corners. Please be careful when handling. If a large amount of stress is applied to the shade parts, the parts may break. When broken, the broken part has a sharp angle and is very dangerous. When attaching the O-ring for fixing, please hold the main body of the LED lantern. Holding the shade parts is very dangerous as it increases the possibility of damage to the parts. Contents (Material) Shade parts (acrylic): 6 pieces O-ring for fixing (NBR): 1 piece
-
【受注生産】冬02ゴールゼロカスタム(GOAL ZERO Lighthouse Micro用)
¥5,500
◆こちらの商品は受注生産品となります。(システムの都合上、「在庫あり」と表示されます) ご注文いただいてからの製作となりますので発送までに1〜2週間程度お時間をいただきます。 冬02ゴールゼロカスタム GOAL ZERO Lighthouse Micro用のランタンシェードです。 (LEDランタン本体は付属しません) 冬02(LEDLENSER ML4用)をゴールゼロ用にカスタム加工します。 ゴールゼロ用ではML4用のように組む順番を変えられません。 よって、以下のパターンから組む順番をお選びください(写真はパターン1です) ・パターン1 電源ボタンに近い方から、 リング:半乳 結晶大ロゴ入り:特殊加工透明 結晶大:特殊加工透明 結晶小:濃い青 結晶小:半乳 結晶小:薄い青 ・パターン2 電源ボタンに近い方から、 リング:半乳 結晶小:濃い青 結晶小:半乳 結晶小:薄い青 結晶大ロゴ入り:特殊加工透明 結晶大:特殊加工透明 ・レッドレンザー用の冬02パーツから穴径のみゴールゼロ用に変更して作成します。 ・外観写真は、ゴールゼロにレッドレンザー用の冬02パーツを当てがったイメージです。 ・発光写真は、レッドレンザー発光によるイメージです。 細心の注意を払いながらレーザー加工していますが、 シェードパーツ表面に多少の加工痕が残る場合がございます。予めご了承ください。 【使用上の注意】 ・エッジが鋭角になっています。取り扱いの際にはご注意ください。 ・シェードパーツに大きな応力が加わった場合、パーツが破損する場合がございます。 破損時は、破損部が鋭角を持ち大変危険ですので、使用はお控えください。 ・固定用Oリングを取り付ける際は、LEDランタン本体を持って行ってください。 シェードパーツを持つと、パーツが破損する可能性が高まり大変危険です。 【内容物(材質)】 ・シェードパーツ(アクリル):6枚 ・固定用Oリング(NBR):1個 ◆This product is made-to-order. (Due to system reasons, it is displayed as "In stock".) Please allow 1 to 2 weeks for shipping as it will be made to order. Winter 02 GOAL ZERO Custom Lantern shade for GOAL ZERO Lighthouse Micro. (LED lantern itself is not included) Winter 02 (for LEDLENSER ML4) will be custom processed for GOAL ZERO. For GOAL ZERO, it is not possible to change the order of assembling like for ML4. Therefore, please choose the order of assembly from the following patterns (the photo shows Pattern 1) Pattern 1 From the one nearest to the power button Ring: semi-milk Large crystal with logo: Special processing transparency Large crystal: transparent with special processing Small crystal: dark blue Small crystal: semi-milk Small crystal: light blue Pattern 2 From the one nearest to the power button Ring: half milk Small crystals: dark blue Small crystal: half milk Small crystal: light blue Large crystal with logo: transparent Large crystal: specially processed transparent Only the hole diameter is changed for Goal Zero from Winter 02 parts for Red Lenser. The photo shows the image of applying the Winter 02 parts for Red Lenzer to Goal Zero. The photo shows the image of Red Lensor's light emission. Although the laser processing was done with the utmost care, there may be some marks on the surface of the shade parts. Please note that some processing marks may remain on the surface of the shade parts. Please note that there may be some marks on the surface of the shade parts. Cautions for use The edges of this product have sharp corners. Please be careful when handling. If a large amount of stress is applied to the shade parts, the parts may break. When broken, the broken part has a sharp angle and is very dangerous. When attaching the O-ring for fixing, please hold the main body of the LED lantern. Holding the shade parts is very dangerous as it increases the possibility of damage to the parts. Contents (Material) Shade parts (acrylic): 6 pieces O-ring for fixing (NBR): 1 piece
-
【現品限り】レザーカバー(GOAL ZERO Lighthouse Micro用)
¥490
50%OFF
50%OFF
SOLD OUT
◆こちらの商品は現品限りとなります。 GOAL ZERO Lighthouse Micro用のレザーカバーです。 (LEDランタン本体は付属しません) カバー本体とひものセットとなり、ご自身で装着お願いいたします。 シンプルに美しく仕上げています。 丁寧にコバ処理をしており、ミンクオイルによるひび割れ防止・防水処理も施してあります。 【使用上の注意】 ・カバー本体は天然の革素材を使用している為、多少の傷や汚れがある場合があり、また経年劣化による色褪せもしますが、素材の特徴として予めご了承ください。 ・カバー本体は防水処理してあるものの、革製品であるがゆえ基本水厳禁です。もし万が一濡れてしまったときは、乾いた布で水分をしっかりとふき取って乾かしてください。 【内容物(材質)】 ・カバー本体(牛なめし革):1枚 ・ひも(革):1個