-
春01(LEDLENSER ML4用)
¥5,500
春01 LEDLENSER ML4用のランタンシェードです。 (LEDランタン本体は付属しません) 川の水面に浮かぶ桜の花びらをマット加工したアクリルで表現しました。 組む順番やパーツの向きを変えると桜の見栄えが大きく変化します。 ぜひ自分好みの美しい見栄えを見つけてみてください。 取り付けは、ランタン底のキャップを外して順番に差し込むだけです。 調整用パッキンを厚み違いで2種類お付けします。お好みでお使いください。 材料厚みはある程度バラツキがあるため、 部品間に多少のガタツキが出る場合がございます。予めご了承ください。 細心の注意を払いながらレーザー加工していますが、 シェードパーツ表面に多少の加工痕が残る場合がございます。予めご了承ください。 【使用上の注意】 ・エッジが鋭角になっています。取り扱いの際にはご注意ください。 ・シェードパーツに大きな応力が加わった場合、パーツが破損する場合がございます。 破損時は、破損部が鋭角を持ち大変危険ですので、使用はお控えください。 【内容物(材質)】 ・シェードパーツ(アクリル):7枚 ・調整用パッキン(MDF):2個 Spring 01 Lantern shade for LEDLENSER ML4. (LED lantern itself is not included) The petals of cherry blossoms floating on the surface of river water are expressed with matted acrylic. The appearance of the cherry blossoms can be greatly changed by changing the order of assembly and the direction of the parts. Please try to find your favorite beautiful look. To install, simply remove the caps from the bottom of the lantern and insert the parts in the correct order. Two types of adjustable gaskets of different thicknesses are provided. Please use them according to your preference. Since there is some variation in material thickness, there may be a slight rattling between the parts. There may be a slight rattling between the parts. Please understand this beforehand. Although the laser processing is done with the utmost care However, there may be some processing marks on the surface of the shade parts. Please understand this in advance. Cautions for use The edges are sharply angled. Please be careful when handling. If a large amount of stress is applied to the shade parts, the parts may break. When broken, the broken part has a sharp angle and is very dangerous, so please refrain from using it. Contents (Material) Shade parts (acrylic): 7 pieces Packing for adjustment (MDF): 2 pcs.
-
夏01(LEDLENSER ML4用)
¥5,500
夏01 LEDLENSER ML4用のランタンシェードです。 (LEDランタン本体は付属しません) 夏の向日葵をイメージして3色のアクリルを贅沢に使用しました。 キャンプ場での夏の思い出として印象深く残る逸品です。 取り付けは、ランタン底のキャップを外して順番に差し込むだけです。 調整用パッキンを厚み違いで2種類お付けします。お好みでお使いください。 材料厚みはある程度バラツキがあるため、 部品間に多少のガタツキが出る場合がございます。予めご了承ください。 細心の注意を払いながらレーザー加工していますが、 シェードパーツ表面に多少の加工痕が残る場合がございます。予めご了承ください。 【使用上の注意】 ・エッジが鋭角になっています。取り扱いの際にはご注意ください。 ・シェードパーツに大きな応力が加わった場合、パーツが破損する場合がございます。 破損時は、破損部が鋭角を持ち大変危険ですので、使用はお控えください。 【内容物(材質)】 ・シェードパーツ(アクリル):7枚 ・調整用パッキン(MDF):2個 SUMMER 01 Lantern shade for LEDLENSER ML4. (LED lantern itself is not included) Luxurious acrylics in three colors were used to create the image of sunflowers in summer. It is an excellent product that will leave a lasting impression as a memory of summer at the campsite. To install, simply remove the cap from the bottom of the lantern and insert it in order. Two types of gaskets of different thicknesses are provided for adjustment. Please use them according to your preference. Since there is some variation in material thickness, there may be a slight rattling between the parts. There may be a slight rattling between the parts. Please understand this beforehand. Although the laser processing is done with the utmost care However, there may be some processing marks on the surface of the shade parts. Please understand this in advance. Cautions for use The edges are sharply angled. Please be careful when handling. If a large amount of stress is applied to the shade parts, the parts may break. When broken, the broken part has a sharp angle and is very dangerous, so please refrain from using it. Contents (Material) Shade parts (acrylic): 7 pieces Packing for adjustment (MDF): 2 pcs.
-
【受注生産】夏02(LEDLENSER ML4用)
¥5,500
◆こちらの商品は受注生産品となります。(システムの都合上、「在庫あり」と表示されます) ご注文いただいてからの製作となりますので発送までに1〜2週間程度お時間をいただきます。 夏02 LEDLENSER ML4用のランタンシェードです。 (LEDランタン本体は付属しません) 夏01から緑の葉部分替わりに透明の花びら部分を足し、 よりゴージャスな向日葵のイメージに仕上げました。 取り付けは、ランタン底のキャップを外して順番に差し込むだけです。 調整用パッキンを厚み違いで2種類お付けします。お好みでお使いください。 材料厚みはある程度バラツキがあるため、 部品間に多少のガタツキが出る場合がございます。予めご了承ください。 細心の注意を払いながらレーザー加工していますが、 シェードパーツ表面に多少の加工痕が残る場合がございます。予めご了承ください。 【使用上の注意】 ・エッジが鋭角になっています。取り扱いの際にはご注意ください。 ・シェードパーツに大きな応力が加わった場合、パーツが破損する場合がございます。 破損時は、破損部が鋭角を持ち大変危険ですので、使用はお控えください。 【内容物(材質)】 ・シェードパーツ(アクリル):7枚 ・調整用パッキン(MDF):2個 ◆This product is made-to-order. (Due to system reasons, it is displayed as "In stock".) Please allow 1 to 2 weeks for delivery as this product is made to order. SUMMER 02 Lantern shade for LEDLENSER ML4. (LED lantern itself is not included) Transparent petals have been added in place of the green leaves from Summer 01 to create a more gorgeous sunflower image. The transparent petals have been added in place of the green leaves to create a more gorgeous image of a sunflower. To install, simply remove the caps from the bottom of the lantern and insert them in order. Two types of adjustable gaskets of different thicknesses are provided. Please use them according to your preference. Since there is some variation in material thickness, there may be a slight rattling between the parts. There may be a slight rattling between the parts. Please understand this beforehand. Although the laser processing is done with the utmost care However, there may be some processing marks on the surface of the shade parts. Please understand this in advance. Cautions for use The edges are sharply angled. Please be careful when handling. If a large amount of stress is applied to the shade parts, the parts may break. When broken, the broken part has a sharp angle and is very dangerous, so please refrain from using it. Contents (Material) Shade parts (acrylic): 7 pieces Packing for adjustment (MDF): 2 pcs.
-
【受注生産】夏01→夏02換装パーツ(LEDLENSER ML4用)
¥1,900
◆こちらの商品は受注生産品となります。(システムの都合上、「在庫あり」と表示されます) ご注文いただいてからの製作となりますので発送までに1〜2週間程度お時間をいただきます。 夏01を夏02に換装できるパーツセットです。 夏01と夏02の差分である透明パーツ3個のみの販売となります。 調整用パッキンは付属しません。 夏01をお持ちの方のみご購入ください。 材料厚みはある程度バラツキがあるため、 部品間に多少のガタツキが出る場合がございます。予めご了承ください。 細心の注意を払いながらレーザー加工していますが、 シェードパーツ表面に多少の加工痕が残る場合がございます。予めご了承ください。 【使用上の注意】 ・エッジが鋭角になっています。取り扱いの際にはご注意ください。 ・シェードパーツに大きな応力が加わった場合、パーツが破損する場合がございます。 破損時は、破損部が鋭角を持ち大変危険ですので、使用はお控えください。 【内容物(材質)】 ・シェードパーツ(アクリル):3枚 ◆This product is made-to-order. (Due to system reasons, it is displayed as "In stock".) Please allow 1 to 2 weeks for delivery as this product is made to order. This is a set of parts to convert Summer 01 to Summer 02. Only 3 transparent parts, which are the difference between Summer 01 and Summer 02, are sold. Packing for adjustment is not included. Please purchase only if you have Summer 01. Material thicknesses will vary to some degree, so there will be some rattling between parts. There may be some rattling between parts. Please understand this beforehand. Although the laser processing is done with the utmost care There is a possibility that some processing marks may remain on the surface of the shade parts. Please understand this in advance. Cautions for use The edges are sharply angled. Please be careful when handling. If a large amount of stress is applied to the shade parts, the parts may break. When broken, the broken part has a sharp angle and is very dangerous, so please refrain from using it. Contents (Material) Shade parts (acrylic): 3 pieces
-
夏05(LEDLENSER ML4用)
¥3,000
夏05 LEDLENSER ML4用のランタンシェードです。 (LEDランタン本体は付属しません) 夏の風物詩であるかき氷を特殊加工されたアクリルを用いて表現しました。 一つ一つ手作業で曲げ加工し、更にグラディエーションカラーに染色した拘りの一品です。 取り付けは、ランタン底のキャップを外して差し込むだけです。 調整用パッキンを厚み違いで2種類お付けします。お好みでお使いください。 手作業で曲げ加工と染色を行なっているため、 歪み, ガタツキ, 色の濃さ, 色のムラ等に個体差が出る場合がございます。予めご了承ください。 細心の注意を払いながらレーザー加工していますが、 シェードパーツ表面に多少の加工痕が残る場合がございます。予めご了承ください。 【使用上の注意】 ・エッジが鋭角になっています。取り扱いの際にはご注意ください。 ・シェードパーツに大きな応力が加わった場合、パーツが破損する場合がございます。 破損時は、破損部が鋭角を持ち大変危険ですので、使用はお控えください。 【内容物(材質)】 ・シェードパーツ(アクリル):1枚 ・調整用パッキン(MDF):2個 Summer 05 Lantern shade for LEDLENSER ML4. (LED lantern itself is not included) Shaved ice, a summer tradition, is expressed using specially processed acrylic. Each piece is bent by hand and dyed in gradation colors. To install, simply remove the cap from the bottom of the lantern and insert it. Two types of gaskets of different thicknesses are provided for adjustment. Please use them according to your preference. Because the bending and dyeing are done by hand, there may be There may be individual differences in distortion, rattling, color intensity, unevenness of color, etc. Please understand this in advance. Although the laser processing is done with the utmost care, there may be some marks on the surface of the shade parts. Please note that some processing marks may remain on the surface of the shade parts. Please understand this in advance. Cautions for use The edges are sharply angled. Please be careful when handling. If a large amount of stress is applied to the shade parts, the parts may break. When broken, the broken part has a sharp angle and is very dangerous, so please refrain from using it. Contents (Material) Shade parts (acrylic): 1 piece Packing for adjustment (MDF): 2 pcs.
-
夏06(LEDLENSER ML4用)
¥3,000
夏06 LEDLENSER ML4用のランタンシェードです。 (LEDランタン本体は付属しません) 夏の風物詩であるかき氷を特殊加工されたアクリルを用いて表現しました。 一つ一つ手作業で曲げ加工し、更にグラディエーションカラーに染色した拘りの一品です。 取り付けは、ランタン底のキャップを外して差し込むだけです。 調整用パッキンを厚み違いで2種類お付けします。お好みでお使いください。 手作業で曲げ加工と染色を行なっているため、 歪み, ガタツキ, 色の濃さ, 色のムラ等に個体差が出る場合がございます。予めご了承ください。 細心の注意を払いながらレーザー加工していますが、 シェードパーツ表面に多少の加工痕が残る場合がございます。予めご了承ください。 【使用上の注意】 ・エッジが鋭角になっています。取り扱いの際にはご注意ください。 ・シェードパーツに大きな応力が加わった場合、パーツが破損する場合がございます。 破損時は、破損部が鋭角を持ち大変危険ですので、使用はお控えください。 【内容物(材質)】 ・シェードパーツ(アクリル):1枚 ・調整用パッキン(MDF):2個 Summer 06 Lantern shade for LEDLENSER ML4. (LED lantern itself is not included) Shaved ice, a summer tradition, is expressed using specially processed acrylic. Each piece is bent by hand and dyed in gradation colors. To install, simply remove the cap from the bottom of the lantern and insert it. Two types of gaskets of different thicknesses are provided for adjustment. Please use them according to your preference. Because the bending and dyeing are done by hand, there may be There may be individual differences in distortion, rattling, color intensity, unevenness of color, etc. Please understand this in advance. Although the laser processing is done with the utmost care, there may be some marks on the surface of the shade parts. Please note that some processing marks may remain on the surface of the shade parts. Please understand this in advance. Cautions for use The edges are sharply angled. Please be careful when handling. If a large amount of stress is applied to the shade parts, the parts may break. When broken, the broken part has a sharp angle and is very dangerous, so please refrain from using it. Contents (Material) Shade parts (acrylic): 1 piece Packing for adjustment (MDF): 2 pcs.
-
夏07(LEDLENSER ML4用)
¥3,000
夏07 LEDLENSER ML4用のランタンシェードです。 (LEDランタン本体は付属しません) 夏の風物詩であるかき氷を特殊加工されたアクリルを用いて表現しました。 一つ一つ手作業で曲げ加工し、更にグラディエーションカラーに染色した拘りの一品です。 取り付けは、ランタン底のキャップを外して差し込むだけです。 調整用パッキンを厚み違いで2種類お付けします。お好みでお使いください。 手作業で曲げ加工と染色を行なっているため、 歪み, ガタツキ, 色の濃さ, 色のムラ等に個体差が出る場合がございます。予めご了承ください。 細心の注意を払いながらレーザー加工していますが、 シェードパーツ表面に多少の加工痕が残る場合がございます。予めご了承ください。 【使用上の注意】 ・エッジが鋭角になっています。取り扱いの際にはご注意ください。 ・シェードパーツに大きな応力が加わった場合、パーツが破損する場合がございます。 破損時は、破損部が鋭角を持ち大変危険ですので、使用はお控えください。 【内容物(材質)】 ・シェードパーツ(アクリル):1枚 ・調整用パッキン(MDF):2個 Summer 07 Lantern shade for LEDLENSER ML4. (LED lantern itself is not included) Shaved ice, a summer tradition, is expressed using specially processed acrylic. Each piece is bent by hand and dyed in gradation colors. To install, simply remove the cap from the bottom of the lantern and insert it. Two types of gaskets of different thicknesses are provided for adjustment. Please use them according to your preference. Because the bending and dyeing are done by hand, there may be There may be individual differences in distortion, rattling, color intensity, unevenness of color, etc. Please understand this in advance. Although the laser processing is done with the utmost care, there may be some marks on the surface of the shade parts. Please note that some processing marks may remain on the surface of the shade parts. Please understand this in advance. Cautions for use The edges are sharply angled. Please be careful when handling. If a large amount of stress is applied to the shade parts, the parts may break. When broken, the broken part has a sharp angle and is very dangerous, so please refrain from using it. Contents (Material) Shade parts (acrylic): 1 piece Packing for adjustment (MDF): 2 pcs.
-
夏08(LEDLENSER ML4用)
¥3,000
夏08 LEDLENSER ML4用のランタンシェードです。 (LEDランタン本体は付属しません) 夏の風物詩であるかき氷を特殊加工されたアクリルを用いて表現しました。 一つ一つ手作業で曲げ加工し、更にグラディエーションカラーに染色した拘りの一品です。 取り付けは、ランタン底のキャップを外して差し込むだけです。 調整用パッキンを厚み違いで2種類お付けします。お好みでお使いください。 手作業で曲げ加工と染色を行なっているため、 歪み, ガタツキ, 色の濃さ, 色のムラ等に個体差が出る場合がございます。予めご了承ください。 細心の注意を払いながらレーザー加工していますが、 シェードパーツ表面に多少の加工痕が残る場合がございます。予めご了承ください。 【使用上の注意】 ・エッジが鋭角になっています。取り扱いの際にはご注意ください。 ・シェードパーツに大きな応力が加わった場合、パーツが破損する場合がございます。 破損時は、破損部が鋭角を持ち大変危険ですので、使用はお控えください。 【内容物(材質)】 ・シェードパーツ(アクリル):1枚 ・調整用パッキン(MDF):2個 Summer 08 Lantern shade for LEDLENSER ML4. (LED lantern itself is not included) Shaved ice, a summer tradition, is expressed using specially processed acrylic. Each piece is bent by hand and dyed in gradation colors. To install, simply remove the cap from the bottom of the lantern and insert it. Two types of gaskets of different thicknesses are provided for adjustment. Please use them according to your preference. Because the bending and dyeing are done by hand, there may be There may be individual differences in distortion, rattling, color intensity, unevenness of color, etc. Please understand this in advance. Although the laser processing is done with the utmost care, there may be some marks on the surface of the shade parts. Please note that some processing marks may remain on the surface of the shade parts. Please understand this in advance. Cautions for use The edges are sharply angled. Please be careful when handling. If a large amount of stress is applied to the shade parts, the parts may break. When broken, the broken part has a sharp angle and is very dangerous, so please refrain from using it. Contents (Material) Shade parts (acrylic): 1 piece Packing for adjustment (MDF): 2 pcs.
-
【受注生産】秋01(LEDLENSER ML4用)
¥5,500
◆こちらの商品は受注生産品となります。(システムの都合上、「在庫あり」と表示されます) ご注文いただいてからの製作となりますので発送までに1〜2週間程度お時間をいただきます。 秋01 LEDLENSER ML4用のランタンシェードです。 (LEDランタン本体は付属しません) 本製品の紅葉型パーツの色は、赤と黄です。 窓から見る秋の絶景を3色のアクリルを贅沢に使用して表現しました。 思わず見惚れてしまうような美しさを独り占めしてください。 取り付けは、ランタン底のキャップを外して順番に差し込むだけです。 調整用パッキンを厚み違いで2種類お付けします。お好みでお使いください。 材料厚みはある程度バラツキがあるため、 部品間に多少のガタツキが出る場合がございます。予めご了承ください。 細心の注意を払いながらレーザー加工していますが、 シェードパーツ表面に多少の加工痕が残る場合がございます。予めご了承ください。 【使用上の注意】 ・エッジが鋭角になっています。取り扱いの際にはご注意ください。 ・シェードパーツに大きな応力が加わった場合、パーツが破損する場合がございます。 破損時は、破損部が鋭角を持ち大変危険ですので、使用はお控えください。 【内容物(材質)】 ・シェードパーツ(アクリル):7枚 ・調整用パッキン(MDF):2個 ◆This product is made-to-order. (Due to system reasons, it is displayed as "In stock".) Please allow 1 to 2 weeks for delivery as this product is made to order. Autumn 01 Lantern shade for LEDLENSER ML4. (LED lantern itself is not included) The colors of the autumn leaf-shaped parts of this product are red and yellow. The spectacular view of autumn seen from the window is expressed by using three colors of acrylics in a luxurious way. Please keep the beauty all to yourself so that you can admire it unintentionally. To install, simply remove the cap from the bottom of the lantern and insert it in order. Two types of adjustable gaskets of different thicknesses are provided. Please use them according to your preference. Since there is some variation in material thickness, there may be a slight rattling between the parts. There may be a slight rattling between the parts. Please understand this beforehand. Although the laser processing is done with the utmost care However, there may be some processing marks on the surface of the shade parts. Please understand this in advance. Cautions for use The edges are sharply angled. Please be careful when handling. If a large amount of stress is applied to the shade parts, the parts may break. When broken, the broken part has a sharp angle and is very dangerous, so please refrain from using it. Contents (Material) Shade parts (acrylic): 7 pieces Packing for adjustment (MDF): 2 pcs.
-
秋02(LEDLENSER ML4用)
¥5,500
秋02 LEDLENSER ML4用のランタンシェードです。 (LEDランタン本体は付属しません) 本製品の紅葉型パーツの色は、赤とオレンジです。 窓から見る秋の絶景を3色のアクリルを贅沢に使用して表現しました。 思わず見惚れてしまうような美しさを独り占めしてください。 取り付けは、ランタン底のキャップを外して順番に差し込むだけです。 調整用パッキンを厚み違いで2種類お付けします。お好みでお使いください。 材料厚みはある程度バラツキがあるため、 部品間に多少のガタツキが出る場合がございます。予めご了承ください。 細心の注意を払いながらレーザー加工していますが、 シェードパーツ表面に多少の加工痕が残る場合がございます。予めご了承ください。 【使用上の注意】 ・エッジが鋭角になっています。取り扱いの際にはご注意ください。 ・シェードパーツに大きな応力が加わった場合、パーツが破損する場合がございます。 破損時は、破損部が鋭角を持ち大変危険ですので、使用はお控えください。 【内容物(材質)】 ・シェードパーツ(アクリル):7枚 ・調整用パッキン(MDF):2個 Autumn 02 Lantern shade for LEDLENSER ML4. (LED lantern itself is not included) The colors of the autumn leaf-shaped parts of this product are red and orange. The spectacular view of autumn seen from the window is expressed with the luxurious use of acrylic in three different colors. Keep the beauty all to yourself as you gaze upon it. To install, simply remove the cap from the bottom of the lantern and insert it in order. Two types of adjustable gaskets of different thicknesses are provided. Please use them according to your preference. Since there is some variation in material thickness, there may be a slight rattling between the parts. There may be a slight rattling between the parts. Please understand this beforehand. Although the laser processing is done with the utmost care However, there may be some processing marks on the surface of the shade parts. Please understand this in advance. Cautions for use The edges are sharply angled. Please be careful when handling. If a large amount of stress is applied to the shade parts, the parts may break. When broken, the broken part has a sharp angle and is very dangerous, so please refrain from using it. Contents (Material) Shade parts (acrylic): 7 pieces Packing for adjustment (MDF): 2 pcs.
-
冬01(LEDLENSER ML4用)
¥5,500
◆本商品はGOAL ZERO Lighthouse Micro用としてカスタム受注もできます。購入希望のお客様は、チャットbotや問い合わせフォーム等からご連絡願います。 冬01 LEDLENSER ML4用のランタンシェードです。 (LEDランタン本体は付属しません) 神秘的な雪の結晶を特殊加工されたアクリルを用いて表現しました。 組む順番やパーツの向きを変えると結晶の見栄えが大きく変化します。 ぜひ自分好みの美しい見栄えを見つけてみてください。 取り付けは、ランタン底のキャップを外して順番に差し込むだけです。 調整用パッキンを厚み違いで2種類お付けします。お好みでお使いください。 材料厚みはある程度バラツキがあるため、 部品間に多少のガタツキが出る場合がございます。予めご了承ください。 細心の注意を払いながらレーザー加工していますが、 シェードパーツ表面に多少の加工痕が残る場合がございます。予めご了承ください。 【使用上の注意】 ・エッジが鋭角になっています。取り扱いの際にはご注意ください。 ・シェードパーツに大きな応力が加わった場合、パーツが破損する場合がございます。 破損時は、破損部が鋭角を持ち大変危険ですので、使用はお控えください。 【内容物(材質)】 ・シェードパーツ(アクリル):7枚 ・調整用パッキン(MDF):2個 Custom orders for GOAL ZERO Lighthouse Micro are also available. If you are interested in purchasing this product, please contact us through our chat bot or inquiry form. Winter 01 Lantern shade for LEDLENSER ML4. (LED lantern itself is not included) Mysterious snow crystals are expressed using specially processed acrylic. The appearance of the crystals can be greatly changed by changing the order of assembly and the direction of the parts. Please try to find your favorite beautiful look. To install, simply remove the caps from the bottom of the lantern and insert the parts in the correct order. Two types of adjustable gaskets of different thicknesses are provided. Please use them according to your preference. Since there is some variation in material thickness, there may be a slight rattling between the parts. There may be a slight rattling between the parts. Please understand this beforehand. Although the laser processing is done with the utmost care However, there may be some processing marks on the surface of the shade parts. Please understand this in advance. Cautions for use The edges are sharply angled. Please be careful when handling. If a large amount of stress is applied to the shade parts, the parts may break. When broken, the broken part has a sharp angle and is very dangerous, so please refrain from using it. Contents (Material) Shade parts (acrylic): 7 pieces Packing for adjustment (MDF): 2 pcs.
-
冬02(LEDLENSER ML4用)
¥5,500
◆本商品はGOAL ZERO Lighthouse Micro用としてカスタム受注もできます。購入希望のお客様は、チャットbotや問い合わせフォーム等からご連絡願います。 冬02 LEDLENSER ML4用のランタンシェードです。 (LEDランタン本体は付属しません) 神秘的な雪の結晶を特殊加工されたアクリルを用いて表現しました。 組む順番やパーツ向きを変えると結晶の見栄えが大きく変化します。 ぜひ自分好みの美しい見栄えを見つけてみてください。 取り付けは、ランタン底のキャップを外して順番に差し込むだけです。 調整用パッキンを厚み違いで2種類お付けします。お好みでお使いください。 材料厚みはある程度バラツキがあるため、 部品間に多少のガタツキが出る場合がございます。予めご了承ください。 細心の注意を払いながらレーザー加工していますが、 シェードパーツ表面に多少の加工痕が残る場合がございます。予めご了承ください。 【使用上の注意】 ・エッジが鋭角になっています。取り扱いの際にはご注意ください。 ・シェードパーツに大きな応力が加わった場合、パーツが破損する場合がございます。 破損時は、破損部が鋭角を持ち大変危険ですので、使用はお控えください。 【内容物(材質)】 ・シェードパーツ(アクリル):7枚 ・調整用パッキン(MDF):2個 Custom orders for GOAL ZERO Lighthouse Micro are also available. If you are interested in purchasing this product, please contact us through our chat bot or inquiry form. Winter 02 Lantern shade for LEDLENSER ML4. (LED lantern itself is not included) Mysterious snow crystals are expressed using specially processed acrylic. The appearance of the crystals can be greatly changed by changing the order of assembly and the direction of the parts. Please try to find your favorite beautiful look. To install, simply remove the caps from the bottom of the lantern and insert the parts in the correct order. Two types of adjustable gaskets of different thicknesses are provided. Please use them according to your preference. Since there is some variation in material thickness, there may be a slight rattling between the parts. There may be a slight rattling between the parts. Please understand this beforehand. Although the laser processing is done with the utmost care However, there may be some processing marks on the surface of the shade parts. Please understand this in advance. Cautions for use The edges are sharply angled. Please be careful when handling. If a large amount of stress is applied to the shade parts, the parts may break. When broken, the broken part has a sharp angle and is very dangerous, so please refrain from using it. Contents (Material) Shade parts (acrylic): 7 pieces Packing for adjustment (MDF): 2 pcs.
-
おうちキャンプ01(LEDLENSER ML4用)
¥2,400
おうちキャンプ01 LEDLENSER ML4用のランタンシェードです。 (LEDランタン本体は付属しません) 冬キャンプが苦手な方、おうちでもキャンプはできます! 気軽にテンションアゲアゲ空間を作って楽しみましょう! 取り付けは、ランタン底のキャップを外して順番に差し込むだけです。 調整用パッキンを厚み違いで2種類お付けします。お好みでお使いください。 材料厚みはある程度バラツキがあるため、 部品間に多少のガタツキが出る場合がございます。予めご了承ください。 細心の注意を払いながらレーザー加工していますが、 シェードパーツ表面に多少の加工痕が残る場合がございます。予めご了承ください。 【使用上の注意】 ・エッジが鋭角になっています。取り扱いの際にはご注意ください。 ・シェードパーツに大きな応力が加わった場合、パーツが破損する場合がございます。 破損時は、破損部が鋭角を持ち大変危険ですので、使用はお控えください。 【内容物(材質)】 ・シェードパーツ(アクリル):7枚 ・調整用パッキン(MDF):2個 Camping at Home 01 Lantern shade for LEDLENSER ML4. (LED lantern itself is not included) If winter camping is not your thing, you can camp at home too! Let's create a space where you can easily get excited and have fun! To install, simply remove the caps from the bottom of the lantern and insert them in order. Two types of adjustable gaskets of different thicknesses are provided. Please use them according to your preference. Since the thickness of the material varies to some extent, there may be a slight rattling between the parts. There may be a slight rattling between the parts. Please understand this beforehand. Although the laser processing is done with the utmost care However, there may be some processing marks on the surface of the shade parts. Please understand this in advance. Cautions for use The edges are sharply angled. Please be careful when handling. If a large amount of stress is applied to the shade parts, the parts may break. When broken, the broken part has a sharp angle and is very dangerous, so please refrain from using it. Contents (Material) Shade parts (acrylic): 7 pieces Packing for adjustment (MDF): 2 pcs.
-
おうちキャンプ02(LEDLENSER ML4用)
¥2,400
おうちキャンプ02 LEDLENSER ML4用のランタンシェードです。 (LEDランタン本体は付属しません) ちょっとピンクなランタンシェードです。 取り付けは、ランタン底のキャップを外して順番に差し込むだけです。 調整用パッキンを厚み違いで2種類お付けします。お好みでお使いください。 材料厚みはある程度バラツキがあるため、 部品間に多少のガタツキが出る場合がございます。予めご了承ください。 細心の注意を払いながらレーザー加工していますが、 シェードパーツ表面に多少の加工痕が残る場合がございます。予めご了承ください。 【使用上の注意】 ・エッジが鋭角になっています。取り扱いの際にはご注意ください。 ・シェードパーツに大きな応力が加わった場合、パーツが破損する場合がございます。 破損時は、破損部が鋭角を持ち大変危険ですので、使用はお控えください。 【内容物(材質)】 ・シェードパーツ(アクリル):7枚 ・調整用パッキン(MDF):2個 Camping at Home 02 Lantern shade for LEDLENSER ML4. (LED lantern itself is not included) A little pink lantern shade. To install, simply remove the caps from the bottom of the lantern and insert them in order. Two types of adjustable gaskets of different thicknesses are provided. Please use them according to your preference. Since the thickness of the material varies to some extent, there may be a slight rattling between the parts. There may be a slight rattling between the parts. Please understand this beforehand. Although the laser processing is done with the utmost care However, there may be some processing marks on the surface of the shade parts. Please understand this in advance. Cautions for use The edges are sharply angled. Please be careful when handling. If a large amount of stress is applied to the shade parts, the parts may break. When broken, the broken part has a sharp angle and is very dangerous, so please refrain from using it. Contents (Material) Shade parts (acrylic): 7 pieces Packing for adjustment (MDF): 2 pcs.
-
持ち運び保護クッション(LEDLENSER ML4用)
¥800
持ち運び保護クッション LEDLENSER ML4用のシェードを装着したままクッカーに収納できる保護クッションです。 (LEDランタン本体, ランタンシェード, クッカーは付属しません) ※シェードと合わせ買いすると送料がお得です。 持ち運び時に衝撃でランタンシェードを破損させてしまう可能性を減らせます。 LEDev製のLEDLENSER ML4用シェード全てに対応しています。 OD缶がジャストフィットするクッカーでご使用ください。 取り付けは、LEDランタン底のキャップと上のボディに差し込むだけです。 細心の注意を払いながらレーザー加工していますが、 製品表面に多少の加工痕が残る場合がございます。予めご了承ください。 【使用上の注意】 ・ランタンシェードへの衝撃を必ず防ぐものではありません。持ち運び前に必ずクッカー内でのガタツキを確認し、お客様の責任の元ご使用ください。 ・クッカー上下方向の衝撃は吸収できません。持ち運び時にクッカーを逆さまにしないでください。 【内容物(材質)】 ・クッションパーツ(EVA):2枚 Carrying Protective Cushion This protective cushion for LEDLENSER ML4 can be stored in the cooker with the shade attached. (LED lantern body, lantern shade, and cooker are not included.) Shipping costs will be reduced if you buy together with the shade. It reduces the possibility of damaging the lantern shade due to impact when carrying it. Compatible with all LEDLENSER ML4 shades made by LEDev. Please use with a cooker that fits the OD can just right. To install, simply insert it into the cap on the bottom of the LED lantern and the body on top. Although the product is laser cut with great care, there may be some marks on the surface of the product. some processing marks may remain on the surface of the product. Please understand this in advance. Cautions for use This product does not always protect the lantern shade from shocks. Please check for any rattling inside the cooker before carrying it, and use it at your own risk. The cooker cannot absorb impacts in the vertical direction. Do not turn the cooker upside down when carrying it. Contents (Material) Cushion parts (EVA): 2 pieces